1. Cannot Detect Port For those who installed Samsung Kies its easy, just connect your USB cord to your PC. Do not connect your phone to Kies. (Kies is just needed for your phones driver.) Again, Samsung Kies should be closed.
**TO KNOW YOUR PORT**
- go to control panel
- go to device and printer
- right click on your phone and open properties
- go to hardware
- then click on standard Modem
- then click on properties below
- a new window will appear ..then click on Modem tab >>>there you will see port:COM(some number ) ..... and maximum port speed ...this is your port no. and in the tk file explorer choose your port speed and type in your port number ..
2. Can you install more fonts? - Yes you can as long as TTF ( TrueTextFont) format. - You may try at www.dafont.com
3. Applying Font After following all instructions and the video, proceed to your phone and do the following: - Settings - Display and Light - Font Type and Set - Restart Phone to apply font
4. Can you use different USB Cable? YES. as long as the cable can properly be connected to your phones port.
Hope this help. Tried and Tested by ME. As a Friendly Advice, don't do anything to any of the phones file or system files if you done anything wrong you might get your phone unusable and if that happens try to reset your firmware, you can use the Samsung Kies.
Note: You may have your phone BACK-UPPED using Kies before exploring your phones system and changing your font.
If this Help. Kindly message me. Thanks
Specially thanks to !! violentkissmuera !! my fellow SB forum-er.
This post has been edited 1 time. The last edit took place 28.01.12, 12:30.