Zedge | Forums: Couldnt find USB setting in E398 hijacke - page 1

Joined: 21 Feb 07
From: Malaysia
Posts: 3

Post #117 April 2007, 08:45

i am using a motorola E398 hijacked.. and i wanna connect it to p2k, but the problem is i couldnt find any USB Setting option (to set it to Fax/Data mode) in Settings>Connection. The only thing inside is Bluetooth link and Sync Options. Please can anyone give me some guidance?

angerinc

Joined: 4 Mar 07
From: Malaysia
Posts: 7

Post #218 April 2007, 22:40

You should take the phone to someone that has the external hardware to unlocking/flashing the phone. Ask him to re-flash with the original firmware.

ncy_ok

Joined: 21 Feb 07
From: Malaysia
Posts: 3

Post #320 April 2007, 03:47

Someone? Like phone dealer or something? I've asked lotsa phone dealer about my problem but they dont seem to know whats going on...

bupahs

Joined: 21 Sep 04
From: United States
Posts: 1282

Post #420 April 2007, 06:01

Quote of user: ncy_ok

Try using P2K tools. You can use P2kT to switch it to p2k mode then fire up P2k Commander (or some other p2k you want to use).

Quitter

avatar

Post #523 April 2007, 16:22

if you use 'Vista' then you definately need the newer p2k drivers or have some knowledge of mapping the drivers.

ncy_ok

Joined: 21 Feb 07
From: Malaysia
Posts: 3

Post #629 April 2007, 22:44

i've read in some forum that said if phone doesnt have usb settings then by default it is set to data/fax mode. However, i still cant connect my phone using p2k tools.

I am using windows xp sp2. And here are the steps that i've done to try to connect my phone.

1) Connect phone via usb to pc.
2) A window pops up, saying that windows found a new hardware and ask me to install driver. I installed the driver inside the p2k tools folder.
3) Another window pops up, saying that my new hardware is installed and ready to use.
4) I open P2KTools(v0.7.1.9) and change it to p2kmode. Then when i press connect, PC couldnt detect my phone anymore. And also "found new hardware (USB Composite Device)" pops up & said problems occured during installation and hardware might not work properly.

Can anyone please help?

bupahs

Joined: 21 Sep 04
From: United States
Posts: 1282

Post #730 April 2007, 03:57

Quote of user: ncy_ok

SP2 tends to give problems when installing the P2K drivers at times.. connect your phone then go to add/remove hardware, then remove the Motorola Modem you see, then disconnect the phone, restart computer and do it again (reinstall the same way you outlined.. sometimes you have to do this a few times to get everything to work correctly. P2K drivers and Windows dont play very nice together